What manly sh!t have you done today?

[LegendaryLiwIII]

Yeah man, Barton Springs is great. Gigantic spring fed swimming hole right in the middle of town. Plus, they allow ladies to go topless there, so you get some fun surprises there sometimes

Damn, didn't know that. Know where I'm going for vacation next, again.

 

[ECC170]

Oh rednecks peckers. Why diddnt you say

didn't want your mouth to salivate bud

 

[Punch]

didn't want your mouth to salivate bud

Bwahahaha

 

[BeardOfKnowledge]

Had my wife make me a sandwich.

 

[SongExotic2]

didn't want your mouth to salivate bud

 

[jason73]

Would love to learn how to use the knife used at the end of this video.

Great movie

 

[BJTT-Rizzo]

I mowed my lawn with no shirt on drinking beer.

 

[teamquestnorth]

I cut a ladys first born from her abdomen

 

[Punch]

Restored a bicycle. Taking it for a spin now.

 

[Hauler]

Changed a 30 amp fuse in a bus duct. The manly part is the bus duct is about 30 feet in the air, and the only way to reach it was by putting a step ladder inside a man basket and having a forklift lift me up as high as it would go.

Gotta do what ya gotta do.

 

[b00ts]

Changed a timing belt on the side of the road with a screw driver, vice grips, breaker bar, and a crescent wrench :|

 

[RaginCajun]

I peed standing up.

 

[DiSmAnTLeR]

Changed a timing belt on the side of the road with a screw driver, vice grips, breaker bar, and a crescent wrench :|

Good job. I once had to change an alternator with a leatherman surge, my 73 year old dad, and a breaker bar that wouldn't seat into the adjustment pulley, so we had to pry it on under tension.

Changed a 30 amp fuse in a bus duct. The manly part is the bus duct is about 30 feet in the air, and the only way to reach it was by putting a step ladder inside a man basket and having a forklift lift me up as high as it would go.

Gotta do what ya gotta do.

 

[DiSmAnTLeR]

Just checked though. He said 30 feet. Those lifts only go to 25 feet working height, which is a 21 foot platform height + 6 feet. He'd still be sticking a ladder on it.

 

[Punch]

Just checked though. He said 30 feet. Those lifts only go to 25 feet working height, which is a 21 foot platform height + 6 feet. He'd still be sticking a ladder on it.

Yeah, that's what he said. Balls of solid rock that one.

 

[Hauler]

Just checked though. He said 30 feet. Those lifts only go to 25 feet working height, which is a 21 foot platform height + 6 feet. He'd still be sticking a ladder on it.

Plus I don't have a lift like that. But I do have a forklift, a man cage and a step ladder. The worst part is pulling the fuses out when you are extended like that. You have to exert enough force to get the fuse out but not so much that when it comes out the momentum sends you toppling off the ladder. It's exciting.

 

[Punch]

Plus I don't have a lift like that. But I do have a forklift, a man cage and a step ladder. The worst part is pulling the fuses out when you are extended like that. You have to exert enough force to get the fuse out but not so much that when it comes out the momentum sends you toppling off the ladder. It's exciting.

I'd have reeked of nervous ass sweat.

 

[DiSmAnTLeR]

Plus I don't have a lift like that. But I do have a forklift, a man cage and a step ladder. The worst part is pulling the fuses out when you are extended like that. You have to exert enough force to get the fuse out but not so much that when it comes out the momentum sends you toppling off the ladder. It's exciting.

We rent them at a day rate. They drop it off and pick it up from site. If we got caught putting the ladder on a man lift the fines (and jail time) vastly outweigh the cost of equipment rental. Alberta recently increased their penalties and deputized a shit ton of new OH&S officers.

Besides, if an employer isn't willing to provide me with the equipment to do the job safely and according to the laws that I'm liable to uphold, I'm not too concerned with their financial bottom line.

Your situation could be different and I don't fault you for your actions. For all I know, you could be a small business owner faced with skyrocketing overhead in material, or in a remote location where getting the lift there isn't feasable. You did the work yourself and didn't pressure an apprentice to do it instead. The lifts I showed didn't even reach high enough for your needs either.

 

[Hauler]

We rent them at a day rate. They drop it off and pick it up from site. If we got caught putting the ladder on a man lift the fines (and jail time) vastly outweigh the cost of equipment rental. Alberta recently increased their penalties and deputized a shit ton of new OH&S officers.

Besides, if an employer isn't willing to provide me with the equipment to do the job safely and according to the laws that I'm liable to uphold, I'm not too concerned with their financial bottom line.

Your situation could be different and I don't fault you for your actions. For all I know, you could be a small business owner faced with skyrocketing overhead in material, or in a remote location where getting the lift there isn't feasable. You did the work yourself and didn't pressure an apprentice to do it instead. The lifts I showed didn't even reach high enough for your needs either.

It was more of a time issue. The fuse blew because a table saw was overloaded and the job they were working on was a rush so I didn't have time to wait for a scissor lift. It took maybe 10 minutes. And my guys know to NEVER do it on their own. I told them if they do something that dumb they are fired - LOL - so they always come and get me when a fuse blows. I've had to do this quite a few times - stupid ass building design putting a bus duct 30 feet in the air.

 

[DiSmAnTLeR]

LOL. I do that while walking a ladder forward instead of getting down and moving it.

'Do not ever **creak creak creak** let me catch you **creak creak creak** walking a ladder while on it .... **creak**

If I go too far, I do a couple bunny hops backwards too! Always good for a laugh!

 

[SongExotic2]

Dang i diddnt do no manly shit yet. Been one of them bitch made days

 

[SongExotic2]

Oh wait im full of shit i had a race with a modded toyota supra this motning fown near the marine base. Kept up with it, thought it was gonna be game over

 

[DiSmAnTLeR]

I haven't answered the OP's question.

I'm laying around recovering from hernia surgery so not much.

Showed the wife how to use the lawnmower and supervised, smoked some herbal pain relief, and drank coffee.

 

[SongExotic2]

I haven't answered the OP's question.

I'm laying around recovering from hernia surgery so not much.

Showed the wife how to use the lawnmower and supervised, smoked some herbal pain relief, and drank coffee.

Coffee? Did you get a hernia from wearing jeans that are too skinny?

 

[Hauler]

I haven't answered the OP's question.

I'm laying around recovering from hernia surgery so not much.

Showed the wife how to use the lawnmower and supervised, smoked some herbal pain relief, and drank coffee.

You still haven't answered OPs question. You just told him what you did today.